Next-Gen UAV Platform · High-Rate Li-ion
Ultra-high discharge Li-ion pack powered by Molicel INR21700-P50B cells. Engineered for extreme payload endurance, zero pouch swelling, and fast turnaround — for industrial inspection, heavy-payload logistics and agricultural UAV systems.
Product — INYX-14S2P-P50B
INYX-14S2P-P50B
14S2P · Molicel P50BUpgrading standard 14S UAV architecture with Molicel 21700 cylindrical cell technology — high discharge, low weight, long cycle life.
240A burst ≤5s for takeoff loads
33% lighter vs ~3,060g pouch packs
>80% capacity retention
10–90% in under 25 minutes
Molicel INR21700-P50B Core (RAC ≤ 15 mΩ)
14S2P · 28 Cells Total
Copper-Nickel Composite Busbars
8AWG Silicone Leads · AS150U-F
Zero Pouch Swelling (Steel Can)
Stable Voltage Under Heavy Climb
JST-XH / MX3.0 15-Pin Balance
-20°C to +60°C Discharge
Designed & Manufactured in India
| Parameter | Specification |
|---|---|
| Model | INYX-14S2P-P50B |
| Cell Architecture | Molicel INR21700-P50B (Cylindrical Li-ion) |
| Pack Configuration | 14S2P (28 Total Cells) |
| Nominal Voltage | 51.8 V (3.7V per cell) |
| Nominal Capacity | 10,000 mAh (10.0 Ah) |
| Total Pack Energy | 518 Wh |
| Max Charging Voltage | 58.8 V (4.20V per cell) |
| Discharge Cutoff Voltage | 35.0 V (2.50V per cell) |
| Max Continuous Discharge | 120 A |
| Peak Burst Discharge (≤5s) | 240 A |
| Max Fast Charge Rate | 20 A (2C Rate) |
| Main Output Interface | AS150U-F Anti-Spark (8AWG Leads) |
| Balance Connector | JST-XH / MX3.0 15-Pin Harness |
| Dimensions (L × W × H) | 178 mm × 148 mm × 68 mm |
| Total Mass | ~2,050 g (approx.) |
| Operating Temp (Discharge) | -20°C to +60°C |
How Inyx Molicel cylindrical technology compares against standard 14S pouch packs.
| Metric / Parameter | Standard 14S 10Ah LiPo | INYX-14S2P-P50B |
|---|---|---|
| Cell Format | Soft Pouch Cells | Steel 21700 Cylindrical |
| Total Pack Weight | ~3,060 g | ~2,050 g (33% Lighter) |
| Cycle Life (80% Capacity) | 150 – 200 Cycles | 500+ Cycles |
| Swelling Risk | High (Pouch gas buildup) | Zero (Rigid Steel Can) |
| Voltage Sag Under Load | Moderate to High | Minimal (Low Resistance) |
Built for industrial UAV platforms that need stable voltage, high burst current and rapid turnaround.
From low-impedance Molicel cells to anti-spark interconnects — engineered for climb-outs, payload and fleet uptime.
Ultra-high discharge 5.0Ah 21700 cells with RAC ≤ 15 mΩ for minimal heat and stable voltage.
Copper-nickel busbars and 8AWG silicone leads with AS150U-F anti-spark connectors.
Steel-sheathed cells retain >80% capacity past 500 deep discharge cycles.
Up to 20A charging — 10% to 90% in under 25 minutes for field crews.
~2,050g pack weight frees payload and extends endurance vs pouch packs.
Cylindrical steel cans eliminate pouch gas buildup and soft-pack failure modes.
10Ah at 51.8V for high-endurance industrial and agricultural missions.
Designed and manufactured by Lithion Power Pvt. Ltd.
Get a datasheet or speak with engineering about connectors, charging and fleet deployment for the INYX-14S2P-P50B.
G-36, Sector-3, Noida, Gautam Buddha Nagar, Uttar Pradesh – 201301, India